SEWAGE EJECTOR SYSTEMS INSTALLATION INSTALL

Smaller models can handle a single bathroom or washing machine, while larger pumps can handle multiple bathrooms. Without a pump, gravity will eventually cause an overflow. If you have plumbing in a basement or below the level of the community sewer line, you will need a sewer ejector pump.

Once the contents reach high enough to lift the float, the pump turns on and forces the waste into the main sewer line. Homes with bathrooms and washing machines in the basement or septic tanks need an ejector pump to make sure the sewage system doesn't get backed up.Įjector pumps sit in a pit in the basement with a float attached, similar to a toilet tank. Sewer ejector pump FAQs What is an ejector pump?Ī sewage ejector pump is a sewer system pump that helps remove waste from basement drains. This pump type is meant to prevent flooding and water damage in homes and is not connected to the sewer system. If your home is prone to power outages, this ensures your plumbing lines will keep working if the electricity goes out.Ī sump pumps costs $600 to $2,500 with installation or $100 to $800 for the unit alone.

SEWAGE EJECTOR SYSTEMS INSTALLATION INSTALL

Septic tank system repairs cost $600 to $3,000.īackup pump – Some homeowners install a battery-powered backup ejector pump. Sewer line repair costs $150 to $3,800 total. Sewer line cleaning costs $150 to $500 for a basic drain snaking or $250 to $800 for hydro jetting. Maintenance & repair – Plumbing inspections cost $100 to $200 for a basic visual inspection. Tank cleaning – Pumping a septic tank costs $300 to $700 or $500 to $1,000 for pumping and cleaning. Adding a subpanel costs $400 to $1,500 if you need to add more circuits to support a new pump.Įnergy costs – Running an ejector pump costs $30 to $60 per month, depending on local electrical rates and how much waste your pump has to handle.

Voltage – Pumps are typically either 120V or 230V. The following factors affect the installation cost:

Sewage ejector systems installation